Compact analyzer for turbidimetric reading with built-in printer.


Perfect for all kinds of laboratories, the Wiener lab. Col 2 is the ideal way to systematize all routine determinations from the Coagulation Department, complying at the same time with the Quality Control regulations.

Procedure:
Wiener lab. Col 2 is a compact 2-channels analyzer whose principle of measurement is Turbodensitometry. When the starter reagent is added, and as the clot is formed, the passage of light begins to decrease. A small steel cylinder is magnetically stirred inside the cuvette in order to keep the particulate reagents in suspension. At a certain level, the reaction stops and the instrument informs and prints the obtained values. The different functions are selected on the liquid crystal screen. The instrument is also provided with a standard RS 232 output port.
The reagents and samples block, heated through Peltier system, contains 1 measuring cell with a magnetic mixing motor, 4 reagent position and 18 positions for reaction cuvettes.


Technical features

• Action principle: Turbodensitometric

• Reading cuvettes: microcuvettes

• Total volume: 150-300 µl

• Display: LCD (Liquid Crystal Display) – 2 line of 20 characters

• Control Panel: membrane keyboard

• Memory: maximum storage of 7 methods

• Conversions: PT (sec) in %, Ratio, INR per calibration curve (max 9 points), Fibrinogen (sec) in g/l or mg/dl per calibration curve (max 9 points).

• Power source: 2 voltages. 115/230 V, 60/50 Hz

• Dimensions: 27.3 x 34.8 x 12.5 cm

• Weight: 5.0 kg